Replacing the back windshield wiper can be a daunting task for many car owners. However, with the right tools and guidance, the process can be quick and easy. In this article, we will provide you with tips and tricks on how to replace your back windshield wiper in a relaxed and easy-to-understand language. Whether you are a DIY enthusiast or a beginner, this guide will help you get the job done in no time.
Step-by-Step Guide to Replacing Your Back Windshield Wiper
Step 1: Remove the Old Wiper Blade
The first step to replacing your back windshield wiper is to remove the old wiper blade. To do this, lift the wiper arm away from the windshield until it locks into an upright position. Then, press the small tab on the underside of the wiper blade and pull the blade down towards the base of the arm. The blade should easily slide out of the arm.
If the blade is stuck, you can use a flathead screwdriver to gently pry it loose. Be careful not to damage the arm or the windshield in the process. Once the blade is removed, dispose of it properly.
Step 2: Measure the Blade Size
Before installing the new wiper blade, you need to measure the size of the old blade. This will ensure that you get the right size for your car. You can find the size of the blade printed on the rubber part of the old blade or in your car's owner's manual.
Alternatively, you can use a tape measure to measure the length of the blade from end to end. Make sure to measure only the rubber part of the blade, excluding the metal arm. Once you have the measurement, you can purchase a new wiper blade that matches the size.
Step 3: Install the New Wiper Blade
Now that you have the correct size for the new wiper blade, it's time to install it. Start by sliding the new blade into the arm until you hear a click. This indicates that the blade is securely attached to the arm. Lower the arm back onto the windshield and repeat the process for the other side if necessary.
Once both blades are installed, test them to make sure they are working properly. Turn on your car's wipers and check to see if the blades move smoothly and without any skipping or streaking. If everything looks good, congratulations! You have successfully replaced your back windshield wiper.
Tips and Tricks for Replacing Your Back Windshield Wiper
Tip 1: Replace Your Wiper Blades Regularly
It's important to replace your wiper blades regularly to ensure that they are working efficiently. Most manufacturers recommend replacing your blades every 6 to 12 months, depending on your driving conditions. If you notice any skipping, streaking, or squeaking, it's time to replace your blades.
Tip 2: Clean Your Windshield Regularly
A dirty windshield can cause your wiper blades to wear out faster. Make sure to clean your windshield regularly to remove any dirt, debris, or grime. You can use a glass cleaner and a soft cloth to do this. Avoid using harsh chemicals or abrasive materials that can scratch your windshield.
Tip 3: Don't Forget the Rear Wiper Blade
Many car owners forget about the rear wiper blade until it's too late. Make sure to check your rear wiper blade regularly and replace it as needed. This will ensure that you have clear visibility when driving in rainy or snowy conditions.
Conclusion
Replacing your back windshield wiper doesn't have to be a difficult or time-consuming task. With our step-by-step guide and tips and tricks, you can easily replace your wiper blades and keep your windshield clean and clear. Remember to replace your blades regularly and clean your windshield to ensure that your wipers are working efficiently. Happy driving!
Komentar
Posting Komentar